P29 Technology • Case Study

For more information please email Paul Rothman or Mark Holdsworth. Thank you.

Applications: Grind Circuit Rougher

Unlock 50% of your Grind Circuit Capacity by Recovering Coarse Minerals from the Circulating Load

CiDRA’s novel technology rapidly recovers minerals at high recoveries with a high degree of selectivity on particles up to 3mm with low mass recovery with zero feed preparation requirements, in contrast to traditional rougher froth flotation operating at a grind size P80 between 100-200µm. P29 technology reduces energy required for grinding by the removal of coarse particles from the circulating load while maintaining benchmark recoveries. The released grind energy can then be used to increase throughput or reduce the overall grind size for flotation while using the same grind equipment. Testing and modelling has shown that for every one tonne of feed going to the P29 plant two tonnes of fresh plant feed can be processed through the same grind circuit, with some supporting equipment modifications and other de-bottlenecking activities.

P29 Technology

Step Change Increase in Selectivity and Recovery of Minerals

CiDRA’s proprietary technology is a novel mineral separation process that uses chemistry and engineered collection media to recover minerals of up to 3mm with a high upgrade ratio and low mass yield. The P29 technology leverages current froth flotation chemistry and replaces the air bubble with an engineered tunable hydrophobic polymer matrix to recover minerals. Replacing the air bubble in froth flotation with an engineered matrix allows for the independent optimization of mineral collection, transport and release delivering recovery of very low exposed minerals at very coarse sizes. The development pathway of the proprietary technology unlocks novel chemistries for mineral recovery that are not achievable in traditional aqueous froth flotation systems today with the potential of economic mineral recovery of ore bodies that are currently uneconomic.

Net Metal Production

Enabling Mine Sites to Deliver a New Optimum in Production

CiDRA’s novel technology rapidly recovers minerals at high recoveries with a high degree of selectivity on particles up to 3mm with low mass recovery with zero feed preparation requirements. This step change in selective mineral recovery provides mines with a new set of operating and financial parameters that significantly increases the productivity of the existing processing assets by over 40%.

The Path to Net Zero

Decreasing the Energy and Water Needs of Mineral Resources

CiDRA’s novel technology enables mine operators to have a significant impact on the 1.3% of the global energy that is consumed by grinding circuits, a reduction in grind specific energy (kWh/t metal) of 50% is achievable. Application of CiDRA’s novel technology to coarse particle recovery unlocks the mines ability to increase total water recovery of up to 80%. These step change improvements in energy and water efficiencies supports mines in not only delivering their ESG goals but also enables the industry to deliver the unprecedented supply of minerals that are required for the delivery of low-carbon and renewable energy technologies needed to achieve the goal of ‘net zero’.

Resource Optimization

Bridging the Critical Supply Deficit in Copper

CiDRA’s novel technology gives a mine a new set of financial and production levers that unlocks throughput and recovery performance with their existing installed plant assets, delivering a new operating point and increasing the value of the mineral resource. This technology provides a low cost solution to ‘turbo-charge’ the performance of the existing plant delivering a boost in productivity for existing resources that enables the industry to meet the copper supply deficit.

旋流供料管线中的磨损和矿石差异性会引起信号不稳定，最终导致电磁流量计的失效。SONARtrac流量计不会受到这些影响，不但提高旋流控制和吞吐量，而且降低总体拥有成本。效益 • SONARtrac流量计可对高固体含量的泥浆，提供精确并可复验的流量测量，同时能够提供更加精确的质量平衡，改进了旋流控制并提高吞吐量 • 非侵入式设计消除磨损 • 适用于内衬管 • 夹带空气测量提供密度校正和实际质量流量 • 消除与电磁流量计替换有关的潜在停机成本 • 无需关停生产的快速安装

旋流供料管线中的磨损和矿石差异性会引起信号不稳定，
最终导致电磁流量计的失效。SONARtrac流量计不会受到
这些影响，不但提高旋流控制和吞吐量，而且降低总体拥
有成本。
效益
• SONARtrac流量计可对高固体含量的泥浆，提供精确
并可复验的流量测量，同时能够提供更加精确的质量平
衡，改进了旋流控制并提高吞吐量
• 非侵入式设计消除磨损
• 适用于内衬管
• 夹带空气测量提供密度校正和实际质量流量
• 消除与电磁流量计替换有关的潜在停机成本
• 无需关停生产的快速安装

Download

Categories: Application Note

Tags: Chinese

Product: SONARtrac

filename: BI0223-CH Rev. C

et_enqueued_post_fonts: a:3:{s:6:"family";a:3:{s:12:"et-gf-oswald";s:34:"Oswald:200,300,regular,500,600,700";s:13:"et-gf-poppins";s:134:"Poppins:100,100italic,200,200italic,300,300italic,regular,italic,500,500italic,600,600italic,700,700italic,800,800italic,900,900italic";s:11:"et-gf-actor";s:13:"Actor:regular";}s:6:"subset";a:2:{i:0;s:5:"latin";i:1;s:9:"latin-ext";}s:9:"cache_key";s:74:"{"gph":0,"divi":"4.27.4","wp":"6.8.2","enable_all_character_sets":"false"}";}